Fasteners, Self-Clinching

BROACHING

Broaching Self Clinching Nuts, Studs and Standoffs are designed for use on Printed Circuit Boards (PCB’s) and on most brittle hard surfaces such as glass, laminates, polycarbonates with Rockwell Hardness of B-60 / B-70 or less.

PANEL SCREWS

Captive Panel Screws with Components provide for permanent assembly into removable sheet metal panels or PCB’s. The pre-assembled spring loaded panel screws for easy mounting.

NUTS

Self Clinching Nuts provide strong load bearing threads in sheet metal and other thin section materials.

STANDOFFS

Self Clinching Standoffs are both threaded or un-threaded into metal panels with thickness of .040 inch (1.0 mm) and up.

STUDS

Self Clinching Studs provide a strong flush head assembly into sheet metal panels as think as .040 inch (1.0 mm) and up.

WELD NUTS

Weld Nuts provide load bearing threads in sheet metal that is usually too thin to tap a hole. Weld Nuts have a three point projection for fast and easy welding.

OUR RESOURCES