VERSAMOUNT™ with ADJUST-A-LOCK™ VERSAMOUNT CARD GUIDE BRACKETS for isolated p.c. card mounting and ADJUST-A-LOCK adjustable locking feature for Versamounts. A pair of Versamounts makes a sturdy, rigid support for mounting of p.c. cards to a chassis or motherboard. Shown here are three sizes of Versamount brackets with molded-in holes to receive various sizes of snap-in Unitrack card guides. Drawings below indicate which card guides fit each size Versamount. Mounting Versamount brackets to a motherboard or chassis require just two holes for each bracket, one for the anti-rotation pin and the other for a #4 or #6 machine screw to make a rugged, vertical or horizontal support for a p.c. card. Versamount brackets and Unitrack card guides are precision molded of durable, tough, dimensionally stable polycarbonate. The ADJUST-A-LOCK can be ordered separately or with the Versamount (see table below). Assemble the ADJUST-A-LOCK, using the hardware furnished, to the Versamount with the snap-in card guide in place. Slide the p.c. card and seat it in its connector. Lower the ADJUST-A-LOCK units onto the pc card and lock in position by tightening the screws. Slide out the p.c. card.                                      Versamount holds p.c. card firmly and ADJUST-A-LOCK securely locks p.c. card in place. The ideal combination for isolated board mounting on chassis or motherboard.