Heyco-Flex Mounting Brackets

        

                                                                       Part Dimensions

Fits Conduit
Tubing
Trade Size		 Part No. UL/CSA
Description		 A
Mounting Hole Dia.
in.        mm.		 C
Max. O. A.
Length
in.          mm.		 D
Body
Length
in.        mm.		 E
Head
Thickness
in.         mm.		 F
Head
Diameter
in.          mm.
3/8 1025 HFB 3/8 .71     18,0 .96      24,4 .67        17,0 .94        23,9 .75       19,0
1/2 1027 HFB 1/2 .84       21,3 1.07     27,1 .68        17,3 1.09      27,7 .75       19,0
3/4 1029 HFB 3/4 1.05     26,7 1.27     32,2 .67        17,0 1.31      33,3 .75       19,0
1 1031 HFB 1 1.32     33,5 1.53     38,9 .84        21,3 1.59      40,4 .75       19,0
  • For mounting Heyco-Flex I Conduit or Heyco-Flex II, III, IV Tubing securely into place-vertically
    or horizontally. See pages 1-2, 1-3, 1-4, 1-5, and 1-6.
  • Only fingertip pressure is required to snap Conduit or Tubing into Bracket.
  • Low profile design for space savings and pleasing appearance.
  • Recommended distance between Brackets at intervals not greater than 3 feet(914mm) as required
    by Article 351-27 of 1996 NEC.
  • Use one standard #10 (4-5M) screw for attaching Bracket to panel or chassis(screw not included).
  • All nylon construction resists against salt water, weak acids, gasoline, alcohol, oil, grease
    and common solvents.
  • Molded of type 6/6 nylon, ASTM D-4066-82; flammability classification 94V-2; temperature index
    125°C.