 Whether the application is to transfer motion or transmit
power, PIC Design has the complete range of gearing needed to fulfill any application
requirement. Standard gears and assemblies are available for operation on parallel and
right-angle shafts, linear motion applications can also be satisfied.
Spur Gears
Designed and manufactured to mount on parallel shafts.
Available in (inch) Diametral Pitch and (metric) Modules.
Miter & Bevel Gears
Designed and manufactured to operate on intersecting
shafts positioned at a right angle.
Spiral Gears
Designed to operate at right angles with the pinion able
to be mounted to mesh with any part of the 360° of the gear.
Cluster Gears
Spur gears manufactured to be mounted on a shaft and
another gear to be mounted on the cluster for use in multiple gear ratios
in a gear box.
Helical Gears
Designed with a 45° Helix angle to operate on parallel
or right angle shafts.
Anti-Backlash Gears
Two independent gears mounted to same hub with a spring
between the two providing a constant full-tooth engagement with the mating
spur gear, thereby eliminating backlash in the mesh. Available in Spur,
Worm and Miter Gears.
Differential
Used in application with one input shaft driving two
output shafts at right angles to the input.
Worm & Worm Wheels
High ratios attainable in a single reduction with shafts
at right angles to each other in limited space.
Pinion Shafts
Designed to be either supported by bearings or pressed
into hollow shaft to operate with spur gear mounted on parallel shaft.
Racks
A gear with the teeth in a straight line, which produces
linear motion when meshed with a circular spur gear. |
