"EZ" Strain Relief Bushings

Micro Plastics New (Patented) "EZ" Strain Relief Bushing is designed to save money. This Strain Relief Bushing eliminates several costly and fatigue prone assembly steps. To install, the "EZ" Bushing hinged halves are simply folded over the wire or cable. No special orientation or alignment is necessary! Conventional Strain Relief Pliers are applied to the specially designed gripped grooves and the bushing is inserted and locked in place in one smooth motion. The "EZ" Strain Relief Bushing design incorporates a bullet shaped, streamlined nose and does away with the large cumbersome straps that complicate the assembly of the conventional style bushing in confined areas. Micro Plastics "EZ" Strain Relief Bushings securely anchor, absorb, and protect cables and wires from push\pull and twist forces and insulate them from irregular or sharp panel edges. These tough nylon bushings meet all Underwriters Laboratories stringent pull-out and temperature specifications.

EASILY INSTALLED COMPETITIVELY PRICED SECURE IN USE FULLY APPROVED

Click here to order samples of any item on this page.

DESCRIPTION							DIMENSIONS
							MOUNTING HOLE			BUSHING
ITEM NUMBER	UL/CSA DESC.	CROSS SEC.	CABLE SIZE	CABLE TYPE	GAUGE (AWG)	DIA. A	FLATS B	MAX. PANEL THK. C	LENGTH D	WIDTH E
-----
23MP04KEZH	MP4KEZH	FLAT	0.150 X 0.280 (3,8 X 7,1)	HPN	18/2	0.500 (12,7)	0.465 (11,8)	0.100 (2,5)	0.550 (14,0)	0.505 (12,8)
			0.150 X 0.280 (3,8 X 7,1)	HPN	16/2 18/2	0.500 (12,7)	0.465 (11,8)	0.100 (2,5)
-----
23MP04KEZS	MP4KEZS	FLAT	0.150 X 0.280 (3,8 X 7,1)	SPT	18/2	0.500 (12,7)	0.465 (11,8)	0.100 (2,5)	0.580 (14,7)	0.510 (12,9)
			0.150 X 0.280 (3,8 X 7,1)	SPT	16/2	0.500 (12,7)	0.465 (11,8)	0.100 (2,4)
-----
23MP04NEZH	MP4KEZH	FLAT	0.150 X 0.280 (3,8 X 7,1)	HPN	18/2	0.500 (12,7)	0.465 (11,8)	0.062 (1,6)	0.550 (14,0)	0.505 (12,8)
-----
23MP04NEZS	MP4NEZS	FLAT	0.150 X 0.280 (3,8 X 7,1)	SPT	18/2	0.500 (12,7)	0.465 (11,8)	0.062 (1,6)	0.570 (14,4)	.500 (12,7)
			0.160 X 0.300 (4,1 X 7,6)	SPT	16/2	0.500 (12,7)	0.465 (11,8)	0.062 (1,6)
-----
23MP06N34EZ	MP6N34EZ	ROUND	0.300 (7,2)	SJT	16/3	0.625 (15,9)	0.550 (14,0)	0.062 (1,6)	0.740 (18,8)	0.640 (16,2)
			0.355 (9,0)	SJ	16/3	0.625 (15,9)	0.550 (14,0)	0.062 (1,6)
			0.405 (10,2)	SJT	18/3	0.625 (15,9)	0.550 (14,0)	0.062 (1,6)
-----
23MP06P34EZ	MP6P34EZ	ROUND	0.300 (7,2)	SJT	16/3	0.625 (15,9)	0.550 (14,0)	0.125 (3,2)	0.740 (18,8)	0.640 (16,2)
			0.355 (9,0)	SJ	16/3	0.625 (15,9)	0.550 (14,0)	0.125 (3,2)
			0.405 (10,2)	SJT	18/3	0.625 (15,9)	0.550 (14,0)	0.125 (3,2)
-----
23MP06N4EZ	MP6N4EZ	ROUND	0.300 (7,2)	SJT	18/2	0.625 (15,9)	0.550 (14,0)	0.062 (1,6)	0.730 (18,5)	0.640 (16,2)
			0.390 (9,9)	SJ0	18/2	0.625 (15,9)

Minimum Order Quantity 1,000 Pieces

| Wire Handling Hardware |
| Micro Plastics Main Index | General Info |