|
Applications which work on the boundaries of the technically feasible are often characterized by premature failure
of the linear bearings.
In many cases, service life can be extended with DryLin. However, it may still be necessary to replace
bearings used in such applications.
DryLin linear bearings can contribute to considerable cost reductions in such cases, as only the bearing
liner made of polymers has to be replaced. This often means a reduction of more than 90% in replacement part costs.
The iglide J liner can be replaced, while a ball-bearing cage cannot.
The new range of split adapters offers even greater cost savings. Shafts need no longer be removed from the
housing. The two shells of the adapter can be opened very easily. The high-performance polymer bearing inside is
split and can easily be pulled off the shaft.
Clip a new bearing over the shaft, put the two adapter halves together, install, and you're done!
The advantages of the simple replacement of maintenance-free bearing shells are combined with the advantages
of self-alignment compensation provided by the TJUI-03 adapters. The self-aligning split adapters are hard-anodized
as standard and are only available in the closed design.
|
