| |
Heyco Straight-Thru Strain Relief Bushings
 Recognized
under the Component Program of Underwriters' Laboratories File #E-15331
 Certified
by Canadian Standards Association File #LR-8919
VDE Test Report #8838-419-4001/A1J
- Standardize panel design! Fill unneeded SR mounting holes with Heyco Double D
Plugs, page 3-17.
Labkit No. 1 (Part #1999)
Provides a working assortment for prototype and laboratory use. 180
assorted Heyco Strain Releifs are identified in a handy compartmentalized plastic box.
Ideal for design engineering groups. Details on page 3-28.
See pages 3-17, 3-18, and 3-19 for Assembly Tools and SR Hole Punches.
Heyco T-Bar
- PART NO. 3191, available in black color only.
- During cable removal or replacement, the T-Bar prevents complete removal of the
Strain Relief Bushing from the chassis, reducing the risk of losing the Bushing.
- Not for use in any mounting hole greater than .625" (16,0mm) in diameter.
- Snap T-Bar onto the Strain Relief Bushing strap (linking body to key piece), then
feed it into the chassis mounting hole.
- Molded of type 6/6 nylon. ASTM D-4066; flammability classification 94V-2;
temperature index 125°C. Maximum temperature on the part shall not exceed 105°C.
|
