| |
Heyco Multi-Lockit Strain Relief Bushings
 Recognized
under the Component Program of Underwriters' Laboratories File LR-15331
 Certified
by Canadian Standards Association File #LR-8919
- Assembly friendly! Independently of insertion into the chassis, Lockit Strain
Reliefs self-lock onto the cable. Thus they may be pre-assembled off-line for final
assembly at a later time or remote location, for lower installed cost!
- Large mounting hole design allows passage of plugs or bulky assmeblies during
Lockit installation.
- Lockit SRs hold so well they pass UL pull-out test requirement with or without
chassis support.
- They protect the lifeline of your electric/electronic products by absorbing the
forces of push and pull that may be exerted on the flexible power cord. And, their
rectangular design eliminates the possibility of part rotation, under forces of twist.
- Eight finger design securely locks into .032° chassis thickness
- Fingertip pressure snaps the Lockit into the mounting hole..
- Molded of type 6/6 nylon. ASTM D-4066; flammability classification 94V-2;
temperature index 125°C. Maximum temperature on the part shall not exceed 105°C.
|
