| |
Heyco Lockit Strain Relief Bushings
 Recognized
under the Component Program of Underwriters' Laboratories File LR-15331
 Certified
by Canadian Standards Association File #LR-8919
US PATENT #4,913,385
For Flat Cables
- Assembly friendly! Independently of insertion into the chassis, Lockit Strain
Reliefs self-lock onto the cable. Thus they may be pre-assembled off-line for final
assembly at a later time or remote location, for lower installed cost!
- Lockit SRs hold so well they pass UL pull-out test requirement with or without
chassis support.
- They protect the lifeline of your electric/electronic products by absorbing the
forces of push and pull that may be exerted on the flexible power cord. And, their
rectangle design eliminates the possibility of part rotation, under forces of twist.
- Lockits' three finger design securely anchors into the chassis as thin as
.032"(0,8mm) and as thick as .099"(2,5mm) for a neat clean appearance. Five
locking steps and a slim head profile make Lockits design specific!
- Standardize panel design! Fill unneeded Lockit SR mounting holes with the Heyco
Recetangle RP 155-130(Part No. 1890).
- Molded of type 6/6 nylon. ASTM D-4066; flammability classification 94V-2;
temperature index 125°C. Maximum temperature on the part shall not exceed 105°C.
 
|
