| |
Heyco®IEC 320 Power Inlet Connectors
With Fuseholder
- The IEC 320 power inlet connector with fuseholder allows you to attach either a
North American or international cordset to your equipment.
- Allow for standardization of equipment for use through out the world.
- Screw on panel mount from front or rear.
- All sizes rated at 10 Amps/250 Volts.
- Nickel plated brass contacts.
- Molded of type 6/6 nylon. Flammability classification 94V-0; temperature index
65°C.
- For international approval status, file numbers and tab connector data, see page
2-9.
5x20mm Fuseholder.
| |
|
|
|
Part Dimensions |
|
Terminal
Tab
Configuration |
Part No. |
Desc |
UL/CSA |
A
in mm |
B
in mm |
C
in mm |
D
in mm |
E
in mm |
Mounting
Hole
Dimensions |
| .187" Q.D.
Tabs |
0953 |
PI 0717 QD 187 |
0717
|
1.73
44,0 |
1.42
36,0 |
1.30
33,0 |
.20
5,0 |
.81
20,6 |
See Schematic
Below |
Short soldering
tabs |
0954 |
PI 0717 ST |
Standard Color: Black
Heyco®Snap-In Power Inlet Connectors
With Fuseholder
- Snap-in, power inlet connector with fuseholder allows you to attach either a
North American or international cordset to your equipment.
- Suitable for chassis from .032"(0,8mm) to .125"(3,2mm) thick.
- Allow for standardization of equipment for use through out the world.
- All sizes rated at 10 Amps/250 Volts.
- Nickel plated brass contacts.
- Molded of type 6/6 nylon. Flammability classification 94V-0; temperature index
65°C.
- For international approval status, file numbers and tab connector data, see page
2-9.
Standard Color: Black
5x20mm Fuseholder.
| |
|
|
|
Part Dimensions |
|
Terminal
Tab
Configuration |
Part No. |
Desc |
UL/CSA |
A
in mm |
B
in mm |
C
in mm |
D
in mm |
E
in mm |
Mounting
Hole
Dimensions |
| .187" Q.D.
Tabs |
0955 |
PI 0717-1 QD 187 |
0717-1
|
1.18
30,0 |
1.06
36,0 |
1.30
27,0 |
.20
5,0 |
.81
20,6 |
See Schematic
Below |
Short soldering
tabs |
0956 |
PI 0717-1 ST |
|
