| |
Heyco-Flex Nylon Straight Connectors
US PATENT No. 4,900,068
Foreign Patents
 Listed
under Underwriters' Laboratories File #E-28430.
 CSA
Certified by Canadian Standards Association File #LR-81067and #LR-84579.
For Flexible, Nonmetallic Liquid Tight Conduit and Tubing
| |
|
|
|
A |
C |
D |
E |
F |
G |
H |
|
Fits Conduit
Trade
Size |
Black |
Gray |
UL/CSA
Desc |
Clearance
Hole
in mm. |
Max O.A.
Length
in mm. |
Thread
Length
in. mm. |
Wrench
NutThk.
in. mm |
Wrench
Flats
in. mm. |
Thickness
in. mm. |
Wrenching
Flats
in. mm. |
Sealing
Washer
Part No. |
| 3/8 |
8400 |
8401 |
HFC 3/8 |
.875 22,2 |
2.00 50,8 |
.625 15,9 |
.250 6,3 |
1.328 33,7 |
.266 6,7 |
1.062 26,9 |
3260 |
| 1/2 |
8402 |
8403 |
HFC 1/2 |
.875 22,2 |
2.00 50,8 |
.625 15,9 |
.250 6,3 |
1.328 33,7 |
.266 6,7 |
1.062 26,9 |
3260 |
| 3/4 |
8404 |
8405 |
HFC 3/4 |
1.109 28,2 |
2.031/51,6 |
.625 15,9 |
.250 6,3 |
1.562 39,7 |
.266 6,7 |
1.312 33,3 |
3261 |
| 1 |
8406 |
8407 |
HFC 1 |
1.375 34,9 |
2.25 57,1 |
.781 19,8 |
.250 6,3 |
1.875 47,6 |
.266 6,7 |
1.625 41,3 |
3262 |
Standard Color: Black or Gray
"PG" Threaded Hub for 1/4" Heyco_Flex Tubing.
| 1/4 |
8398 |
HFC 1/4 PG-7 |
PG-7 |
.492 12,5 |
1.750/44,5 |
.440 11,2 |
.218 5,6 |
1.062 |
.218 5,6 |
.750 19,0 |
3258 |
Standard Color: Black * Gray Connectors provided with assembled
o-ring and metal locknuts.
- Five sizes for 1/4" thru 1". For use with Heyco-Flex
Conduit and Tubing, pages 1-2, 1-3, 1-4 and 1-5. Consult Heyco for 1-1/4",
1-1/2" and 2" trade size.
- All nylon construction resists salt water, weak acids, gasoline, alcohol, oil
grease and common
solvents.
- No disassembly required. Instead, the installer simply pushes the conduit or
tubing onto the ferrule, then tightens the domed sealing nut. This
completed assembly can then be secured in the chassis by the locknut( or first secure
the connector into an NPT threaded hole).
- No threading of the Conduit or Tubing required to install, thus eliminating the
possibility of cutting
the conduit and creating leak paths.
- Complete Conduit/Connector system is reusable. Conduit will not wind tight onto
the connector
during assembly and can be easily removed by pulling while turning in a clockwise
direction.
- Use of a Sealing Washer may be required for wet locations. See page 1-13.
- Suitable for indoor/outdoor use; for orginal equipment manufacturers or field
installers.
- Lower installed cost.
- Protection class IP 68 per DIN 40050 up to 70 psi (5 bar) water pressure.
- Molded of type 6/6 nylon. ASTM D-4066-PA 111; flammability classification 94V-2.
- Black Connectors provided with nylon locknut, packed separately.
- Gray Connectors provided with assembled o-ring and metal locknuts.
 
|
