Heyco-Flex Mounting Brackets
Page1-12-1.jpg (2528 bytes)

                                                                           Part Dimensions
Fits Conduit
Tubing
Trade Size		 Part No. UL/CSA
Description		 A
Mounting Hole Dia.
in.        mm.		 C
Max. O. A.
Length
in.          mm.		 D
Body
Length
in.        mm.		 E
Head
Thickness
in.         mm.		 F
Head
Diameter
in.          mm.
3/8 1025 HFB 3/8 .71     18,0 .96      24,4 .67        17,0 .94        23,9 .75       19,0
1/2 1027 HFB 1/2 .84       21,3 1.07     27,1 .68        17,3 1.09      27,7 .75       19,0
3/4 1029 HFB 3/4 1.05     26,7 1.27     32,2 .67        17,0 1.31      33,3 .75       19,0
1 1031 HFB 1 1.32     33,5 1.53     38,9 .84        21,3 1.59      40,4 .75       19,0
  • For mounting Heyco-Flex I Conduit or Heyco-Flex II, III, IV Tubing securely into place-vertically
    or horizontally. See pages 1-2, 1-3, 1-4, 1-5, and 1-6.
  • Only fingertip pressure is required to snap Conduit or Tubing into Bracket.
  • Low profile design for space savings and pleasing appearance.
  • Recommended distance between Brackets at intervals not greater than 3 feet(914mm) as required
    by Article 351-27 of 1996 NEC.
  • Use one standard #10 (4-5M) screw for attaching Bracket to panel or chassis(screw not included).
  • All nylon construction resists against salt water, weak acids, gasoline, alcohol, oil, grease
    and common solvents.
  • Molded of type 6/6 nylon, ASTM D-4066-82; flammability classification 94V-2; temperature index
    125°C.


    Heyco Liquid Tight Knock-out Seals
    Page1-12-3.jpg (1191 bytes)


    ulrec1i2.gif (519 bytes)         Recognized under the Components Program of Underwriters' Laboratories File                          #E-28430
    ne_csa_mark1.gif (1674 bytes)CSA Certified by Canadian Standards Association File #LR-81067.
  • Oil tight, rain tight, submersible.
  • Three trade sizes fit 1/2" to 1" knock-out holes.
  • Lock firmly in boxes from .030"(0,8mm) to .125"(3,2mm) thick.
  • Install quickly with fingertip pressure(no tool required).
  • Molded of Sanoprene 251-80. Flammability classification 94V-0.
                                                                           Part Dimensions
Maxmum Thickness

in.        mm.		 Mounting Hole Diameter
in.     mm.		 Part No. Description B
Head Diameter
in.          mm.		 C
Overall
Height
in.        mm.		 A
Head
Thickness
in.         mm.

.125        3,2

 .875   22,2 3833 KOS-LT 1/2 1.281    32,5 .500       12,7 .359          9,1

.125        3,2

 1.093  27,8 3835 KOS-LT 3/4 1.531    38,9 .546       13,9 .390          9,9

.125        3,2

 1.375  34,9 3837 KOS-LT 1 1.796    45,6  .562       45,6 .421        10,7

Standard Color: Black

Page1-10-5.gif (15456 bytes)


Click here to order samples of any item on this page.

| Heyco Graphical Product Index | Heyco Text Product Index | New Product Update |

Heyco Products, Inc.
Copyright © 1997-1999 Heyco Products, Inc. All rights reserved.


Other ABE Approved ManufacturersUnitrack Design GuideThomas and Betts Design GuideSouthco Design GuideSanyo Denki Design GuideRecoil Hardware Design GuideRAF Electronic Hardware Design GuidePOP Design GuidePIC Designs Design GuidePanduit Design GuideMicro Plastics Design GuideManhattan/CDT Design GuideKeystone Electronics Design Guideigus Design GuideHeyco Products Design Guide Craftech Design GuideCaptive Fasteners Design GuideAvdel Cherry Textron Design GuideAccuride Design GuideABE Commercial ProductsSearch ABE's web site Manufacturer's Log InCustomer's Log In