Heyco-Flex IV Nylon Straight Connectors
For Flexible, Nonmetallic Tubing
Page1-10-1.gif (15362 bytes)
 

For Flexible, Nonmetallic Tubing
        A C D E F G H  
Fits Conduit
Trade
Size		 Part
No.		 UL/CSA
Desc		 Thread
Size		 Body
Clearance
Hole
in     mm.		 Body
MaxO.A.
Length
in  mm.		 Body
Thread
Length
in. mm.		 Body
Wrench
NutThk.
in.   mm		 Body
Wrench
Flats
in.   mm.
Locking Nut
Thickness
in.    mm.		 Locking Nut
Wrenching
Flats
in.   mm.		 "O" Ring

Part No.
1/4 9140 HF3C 1/4-PG7* PG 7 .492  12,5 1.54 39,1 .45   11,4 .20    5,1 .75    19,1 .22      5,5 .75   1 9,1 1983
3/8 9146 HF3C 3/8 1/2 NPT .875  22,3 1.72 43,7 .63   16,0 .20    5,1 1.18   30,0 .27      6,8 1.08   27,4 1995
1/2 9147 HF3C 1/2 1/2 NPT .875  22,3 1.72 43,7 .63   16,0 .20    5,1 1.18   30,0 .27      6,8 1.08   27,4 1995
3/4 9148 HF3C 3/4 3/4 NPT 1.109/28,2 1.84 46,7 .63   16,0 .20    5,1 1.37   34,8 .27      6,8 1.312 33,3 1996
1 9149 HF3C 1 1 NPT 1.375/35,0 1.99 50,5 .78   19,8 .20    5,1 1.63   41,4 .27      6,8 1.62   41,3 1997

* UR only.

  • Easy, permanent assembly: the installer pushes the Tubing over the Connector ferrule, until the
    Tubing "clicks" into place.
  • Straight Connectors for use in both wet and dry locations.
  • Low profile, discrete and clean appearance.
  • Locknuts included with Straight Connectors.
  • For lowest installed cost, the 1/2" size is also available with a Snap-in hub(see below). Please consult Heyco for 1/4, 3/8, 3/4 and 1" Snap-In versions.
  • Use of a O-ring may be required for a complete liquid tight system.
  • Cost effective, light weight nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
  • Molded of type 6/6 nylon. ASTM D-4066-PA 111; flammability classification 94V-2.

    Page1-10-3.gif (15313 bytes)
    Heyco-Flex IV Nylon Connectors
    For Flexible, Nonmetallic Tubing
    Page1-10-4.gif (10925 bytes)
                                                                           Part Dimensions
Fits Conduit
Tubing
Trade Size		 Part No. UL/CSA
Description		 A
Mounting Hole Dia.
in.        mm.		 C
Max. O. A.
Length
in.          mm.		 D
Body
Length
in.        mm.		 E
Head
Thickness
in.         mm.		 F
Head
Diameter
in.          mm.
1/2 1952 HF3C 1/2-S .875     22,3 1.380    35,1 .390        9,9 .09          2,3 .97        24,6


Page1-10-5.gif (15456 bytes)


Click here to order samples of any item on this page.

| Heyco Graphical Product Index | Heyco Text Product Index | New Product Update |

Heyco Products, Inc.
Copyright © 1997-1999 Heyco Products, Inc. All rights reserved.


Other ABE Approved ManufacturersUnitrack Design GuideThomas and Betts Design GuideSouthco Design GuideSanyo Denki Design GuideRecoil Hardware Design GuideRAF Electronic Hardware Design GuidePOP Design GuidePIC Designs Design GuidePanduit Design GuideMicro Plastics Design GuideManhattan/CDT Design GuideKeystone Electronics Design Guideigus Design GuideHeyco Products Design Guide Craftech Design GuideCaptive Fasteners Design GuideAvdel Cherry Textron Design GuideAccuride Design GuideABE Commercial ProductsSearch ABE's web site Manufacturer's Log InCustomer's Log In