General Specifications

Dielectric Strength: mA max. at 500VAC 1mim. between lead wire & frame
Insulation Resistance: 10M OHM between lead wire & frame (DC 500V)
Life Expectation: 50,000 hrs min. at temp 25º C, humidity 65%
Operating Temperature: - 10º C ~ + 70º C (-40º F~ + 167º F)
Storage Temperature: - 40º C ~ + 75º C (-40º F~ + 167º F)
Protection: Locked rotor protection, polarity protection:
Insulation Class: UL: Class A
Bearing: Ball bearing
Lead Wire: UL 1007 AWG24
Frame, Impeller: Black PBT (UL 94V-0)

 

Part Number Designation

| General Information | General Specifications | Part Number Designation | Delta Products|


Other ABE Approved ManufacturersUnitrack Design GuideThomas and Betts Design GuideSouthco Design GuideSanyo Denki Design GuideRecoil Hardware Design GuideRAF Electronic Hardware Design GuidePOP Design GuidePIC Designs Design GuidePanduit Design GuideMicro Plastics Design GuideManhattan/CDT Design GuideKeystone Electronics Design Guideigus Design GuideHeyco Products Design Guide Craftech Design GuideCaptive Fasteners Design GuideAvdel Cherry Textron Design GuideAccuride Design GuideABE Commercial ProductsSearch ABE's web site Manufacturer's Log InCustomer's Log In