|
Cold Formed Components
Cold forming offers incredible design flexibility and several advantages over screw machining.
|
|
|
|
- Tight tolerances can be held, especially for critical applications
- Uninterrupted grain flow since material is moved, rather than removed
- Many additional shapes are possible when combined with secondary machining
- Wide variety of shapes available
- Size Ranges are 1.27mm(.050") to 40mm(1.5") in diameter and up to 432 mm(17") in length
|
- Conserves raw materials; can reduce scrap by 80% or more
- Multi-piece components can be manufactured as one-piece components
- Intricate designs can be manufactured, while minimizing costs
- CNC machining meets tight tolerance requirements
|
Ball Studs
Centerless ground and precision-turned ball studs can achieve net or near-net shapes.
|
|
|
|
- In-house heat treat facilities for case, core, and induction hardening
- Body diameters up to 1-5/8"
- Lengths up to 10"
- On-site metallurgical analysis
|
- Quality assurance system assures lot traceability
- Special packaging for part protection
- Improves surface finish
- Improves fatigue life
|
Solid Rivets/Shoulder Rivets
Solid Rivets and Shoulder Rivets are permanent fasteners for all types of metals.
|
|
|
|
- Shoulder rivet diameters from 1/8" to 5/8"
- Cold-formed by single or multi-blow headers
- Large rivet diameters from 1/2" to 3/4"
- Small rivet diameters from 1/8" to 7/16"
- Joins dissimilar materials of varied hardness and thickness
- Round, square, "D" shape, and hex tenon body styles
- Multiple shoulder styles; can be used spacers
- Wide variety of standard and special head styles
|
- Precision rivets with excellent shear and compressive strengths
- Rapid installation for automated assembly operations
- Low cost
|
Clevis Pins
Clevis Pins are used as pivots with clevises and rod-end eyes for agricultural, lawn, and construction equipment applications.
|
|
|
|
- Diameters from 3/16" to 3/4"
- Wide variety of standard and special head styles
- Special lengths and multiple holes available
|
- SAE standard clevis pins in stock
- Burr-free countersunk holes
|
Special Pins - Grooved
Radial grooves are used with external "E" series and retaining rings.
|
|
|
|
- Wide variety of standard and special head styles
- Diameters from 1/8" to 1/2"
- Tight body diameter tolerances
- Special lengths and multiple grooves are available
- Radial grooves are used with external "E" series and retaining rings
- Rolled, grooved, and shaved dimensions
|
|
Special Pins - Knurled
Serrated around the nominal diameter of a cylindrical part.
|
|
|
|
|
- Standard and special head styles
- Special lengths available
- Diameters from 1/8" to 5/8"
- Straight, diagonal, diamond, and special knurls
|
|
