Product
Description		 BSI 94 is comprised of a thin polyester film carrier coated with a high performance acrylic-based pressure sensitive adhesive on a 90lb. white kraft release liner
  BSI 95 consists of a thin polyester film coated with an aggressive special purpose, rubber-based pressure sensitive adhesive supplied on 90lb. white kraft release liner.

         

 BSI 94

BSI 95

Test Method

 Physical

    Quick Tack, lbs./in.2

 

 

Loop Track

 Properties

     Stainless Steel

5.0

10.0

  
    Peel Adhesion, lbs./in.

 

 

PSTC-2

      Stainless Steel

 

 

 

        30 Minute Residence

5.0

6.0

 

        24 Hour Residence

6.0

6.5

  
    Shear, Hours to Fail

 

 

 PSTC-7

      Stainless Steel-2# at 73°

30

500+

  
               

 Thickness
Inches

   Carrier Plus Adhesive

.003"

.003"

  
               

Temperature
Ranges

   Application:
End Use:

40°F - 150°F
0°F - 250°F

40°F - 150°F
0°F - 250°F

  


   BSI 95 is resistant to water, detergent and alcohol
  Shelf Life One year when stored at 75°F (24°C) and 50% relative humidity or less
  Application

To obtain maximum adhesion, surfaces must be clean, dry, and well unified. Clean surfaces with low strength solvents such as Isopropyl Alcohol (rubbing alcohol) or Heptain. Follow solvent manufacturer's precautionary warnings and suggested handling procedures when using solvents.

The formulation of composition contains no migratory plasticizers of any kind which would mar surfaces of contact. Users should evaluate products suitability for a specific application under actual use conditions.