CP-xHP Series Ejectors

Please click here to order samples of any item on this page.

CP-xHP™ was introduced in 2000 to meet the requirements of IEEE 1101.10, PICMG 2.0 CompactPCI as well as VME® and EUROCARD specifications. The CP-xHP provides a simple single fastener mounting method that lowers assembly cost and component count. Dual locating pins assure accurate horizontal and vertical alignment on a wide range of faceplates. There are no special tools or fixtures required for installation. CP-xHP Series Ejectors

Compatible with Compact PCI® and VME® faceplates

Innovative single fastener design reduces labor cost

Generous surface area for hot stamping

4HP through 8HP in 1HP increment widths

Compatible with many manufacturers standard devices

Custom colors and hot stamping available (subject to minimum orders)

Catalog Datasheet

Mounting Information:
Extrusions or Face Plates: 0.047" - 0.125" (1.2mm - 3.2mm) thick
All required hardware for installation is provided including a self-taping metal screw

Material Specifications:
Handle: UL Rated 94V-0, Black, ABS Oxygen Index: +28%

Application Notes:
Compatible with all cards of both 4HP through 8HP widths

Ordering Instructions:

Part Number: CP-xHP

Replace "X" with one of the following suffixes:
4 4HP [0.80" 20.3mm] wide
5 5HP [1.00" 25.4mm] wide
6 6HP [1.20" 30.5mm] wide
7 7HP [1.40" 35.6mm] wide
8 8HP [1.60" 40.6mm] wide

cPCI™ - Optoeletronics & LED Assemblies - Hardware
Bivar Home

CP-xHP™ was introduced in 2000 to meet the requirements of IEEE 1101.10, PICMG 2.0 CompactPCI as well as VME® and EUROCARD specifications. The CP-xHP provides a simple single fastener mounting method that lowers assembly cost and component count. Dual locating pins assure accurate horizontal and vertical alignment on a wide range of faceplates. There are no special tools or fixtures required for installation.
Compatible with Compact PCI® and VME® faceplates Innovative single fastener design reduces labor cost Generous surface area for hot stamping 4HP through 8HP in 1HP increment widths Compatible with many manufacturers standard devices Custom colors and hot stamping available (subject to minimum orders) Catalog Datasheet
Mounting Information: Extrusions or Face Plates: 0.047" - 0.125" (1.2mm - 3.2mm) thick All required hardware for installation is provided including a self-taping metal screw
Material Specifications: Handle: UL Rated 94V-0, Black, ABS Oxygen Index: +28%
Application Notes: Compatible with all cards of both 4HP through 8HP widths
Ordering Instructions: Part Number: CP-xHP Replace "X" with one of the following suffixes: 4 4HP [0.80" 20.3mm] wide 5 5HP [1.00" 25.4mm] wide 6 6HP [1.20" 30.5mm] wide 7 7HP [1.40" 35.6mm] wide 8 8HP [1.60" 40.6mm] wide