CPCI-T Transition Guides

Please click here to order samples of any item on this page.

CPCI-T Series introduced in 2000 to meet the upgraded and stringent requirements of IEEE 1101.10 and PICMG 2.0 CompactPCI specifications. Supports rear I/O and modified architectures. Rigid, strong and economical, CPCI-Ts provide the specification compliance and installed reliability that your most demanding rack-mounted products require. Retention is firm and there are no special tools or fixtures required for installation. Hot swap compatible, ESD grounding and IEEE 1101.10 compliant. <a href=

IEEE 1101.10 & PICMG 2.0 Compliant transition guide

Simple snap-in installation in industry standard extrusions

Polarity Keying compatible for proprietary or standard schemes

Conductive Inserts available for ESD, Hot Swap and Polarity compatibility

Available in White and Red for easy identification of systems slot

Available with 10% Glass filled ABS for added rigidity (subject to minimum order)

Full Mechanical Specifications:
CPCI-TB
CPCI-TT

Mounting Information:
Extrusions or Metal Plates: 0.047" - 0.090" (1.2mm - 2.3mm) thick Hole Size: 0.125" (3.2mm) diameter + 0.003 (0.08mm), - 0.001 (0.03mm) on 0.200" (5.08mm) centers

Material Specifications:
UL Rated 94V-0, Natural (off-white), ABS
Oxygen Index: +28%

Application Notes:
Blind holes are provided as standard for additional self-tapping mounting screws if desired

Ordering Instructions:

Part Number: CPCI-T XX

Replace "XX" with the following suffix to complete part number:
RD-T Red color, Top (ABC)
NT-T Natural / White color, Top (ABC)
RD-B Red, Bottom (DEF)
NT-B Natural / White, Bottom (DEF)
RD-T-ESD Red, Top (ABC) with ESD grounding clip
NT-T-ESD Natural / White Top (ABC) with ESD grounding clip
RD-B-ESD Red, Bottom (DEF) with ESD grounding clip
NT-B-ESD Natural / White, Bottom (DEF) with ESD grounding clip

cPCI™ - Optoeletronics & LED Assemblies - Hardware
Bivar Home

CPCI-T Series introduced in 2000 to meet the upgraded and stringent requirements of IEEE 1101.10 and PICMG 2.0 CompactPCI specifications. Supports rear I/O and modified architectures. Rigid, strong and economical, CPCI-Ts provide the specification compliance and installed reliability that your most demanding rack-mounted products require. Retention is firm and there are no special tools or fixtures required for installation. Hot swap compatible, ESD grounding and IEEE 1101.10 compliant.
IEEE 1101.10 & PICMG 2.0 Compliant transition guide Simple snap-in installation in industry standard extrusions Polarity Keying compatible for proprietary or standard schemes Conductive Inserts available for ESD, Hot Swap and Polarity compatibility Available in White and Red for easy identification of systems slot Available with 10% Glass filled ABS for added rigidity (subject to minimum order)
Full Mechanical Specifications: CPCI-TB CPCI-TT
Mounting Information: Extrusions or Metal Plates: 0.047" - 0.090" (1.2mm - 2.3mm) thick Hole Size: 0.125" (3.2mm) diameter + 0.003 (0.08mm), - 0.001 (0.03mm) on 0.200" (5.08mm) centers
Material Specifications: UL Rated 94V-0, Natural (off-white), ABS Oxygen Index: +28%
Application Notes: Blind holes are provided as standard for additional self-tapping mounting screws if desired
Ordering Instructions: Part Number: CPCI-T XX Replace "XX" with the following suffix to complete part number: RD-T Red color, Top (ABC) NT-T Natural / White color, Top (ABC) RD-B Red, Bottom (DEF) NT-B Natural / White, Bottom (DEF) RD-T-ESD Red, Top (ABC) with ESD grounding clip NT-T-ESD Natural / White Top (ABC) with ESD grounding clip RD-B-ESD Red, Bottom (DEF) with ESD grounding clip NT-B-ESD Natural / White, Bottom (DEF) with ESD grounding clip