CPCI-E3 Series Ejectors

Please click here to order samples of any item on this page.

CPCI-E3™ was introduced in 2000 to meet the upgraded and stringent requirements of IEEE 1101.10 and PICMG 2.0 CompactPCI specifications. The CPCI-E3 provides a smaller more refined footprint with ample room for label application or hot stamping. An asymmetrical precision molded spring made with Norel™, an engineering polymer, assures years of reliable use and positive locking. There are no special tools or fixtures required for installation. CPCI-E3 Series Ejectors

IEEE 1101.10 & PICMG 2.0 Compliant

Compact size and unique aesthetics

Innovative positive locking, simple push button release

Supports ESD contact and Hot Swap
(optional micro-switch)

Custom Colors and Labels available
(subject to minimum order)

Catalog Datasheet

Full Mechanical Specifications:
CPCI-E3-B
CPCI-E3-B-HS
CPCI-E3-T

Insertion/Extraction Force White Paper

Mounting Information:
Extrusions or Face Plates: 0.090" - 0.110" (2.3mm - 2.8mm) thick
All required hardware for installation is provided

Material Specifications:
Handle: UL Rated 94V-0, Black, 10% Glass Filled ABS
Oxygen Index: +28%
Spring: UL Rated 94V-0, Blue, Norel
Oxygen Index: +28%
Hinge Block: Die-cast zinc alloy

Application Notes:
Compatible with 6U and 3U cards of both 4HP and 8HP widths
See page xx for recommended faceplate dimensions and mounting.

Ordering Instructions:

Part Number: CPCI-E3- X

Replace "X" with one of the following suffixes:
T - Top position ejector
B - Bottom position ejector
B-HS - Bottom Hot Swap Micro-switch ejector w/ cable

cPCI™ - Optoeletronics & LED Assemblies - Hardware
Bivar Home

CPCI-E3™ was introduced in 2000 to meet the upgraded and stringent requirements of IEEE 1101.10 and PICMG 2.0 CompactPCI specifications. The CPCI-E3 provides a smaller more refined footprint with ample room for label application or hot stamping. An asymmetrical precision molded spring made with Norel™, an engineering polymer, assures years of reliable use and positive locking. There are no special tools or fixtures required for installation.
IEEE 1101.10 & PICMG 2.0 Compliant Compact size and unique aesthetics Innovative positive locking, simple push button release Supports ESD contact and Hot Swap (optional micro-switch) Custom Colors and Labels available (subject to minimum order) Catalog Datasheet
Full Mechanical Specifications: CPCI-E3-B CPCI-E3-B-HS CPCI-E3-T Insertion/Extraction Force White Paper
Mounting Information: Extrusions or Face Plates: 0.090" - 0.110" (2.3mm - 2.8mm) thick All required hardware for installation is provided
Material Specifications: Handle: UL Rated 94V-0, Black, 10% Glass Filled ABS Oxygen Index: +28% Spring: UL Rated 94V-0, Blue, Norel Oxygen Index: +28% Hinge Block: Die-cast zinc alloy
Application Notes: Compatible with 6U and 3U cards of both 4HP and 8HP widths See page xx for recommended faceplate dimensions and mounting.
Ordering Instructions: Part Number: CPCI-E3- X Replace "X" with one of the following suffixes: T - Top position ejector B - Bottom position ejector B-HS - Bottom Hot Swap Micro-switch ejector w/ cable