CPCI Card Guides

Please click here to order samples of any item on this page.

CPCI-2000™, introduced in 2000 to meet the upgraded and stringent requirements of IEEE 1101.10 and PICMG 2.0 CompactPCI specifications. Rigid, strong and economical, CPCI-2000™ provide the specification compliance and installed reliability that your most demanding rack-mounted products require. Retention is firm and there are no special tools or fixtures required for installation. Hot swap compatible, ESD grounding and IEEE 1101.10 compliant ejector.
IEEE 1101.10 & PICMG 2.0 Compliant 150mm card guide Simple snap-in installation in industry standard extrusions Polarity Keying compatible for proprietary or standard schemes Conductive Inserts available for ESD, Hot Swap and Polarity compatibility Available in White and Red for easy identification of systems slot Available with 10% Glass filled ABS for added rigidity (subject to minimum order) Full Mechanical Specification Catalog Datasheet
Mounting Information: Extrusions or Metal Plates: 0.047" - 0.090" (1.2mm - 2.3mm) thick Hole Size: 0.125" (3.2mm) diameter + 0.003 (0.08mm), - 0.001 (0.03mm) on 0.200" (5.08mm) centers
Material Specifications: UL Rated 94V-0, Natural, ABS Oxygen Index: +28%
Application Notes: Compatible with 6U and 3U cards of both 4HP and 8HP widths
Blind holes are provided as standard for additional mounting screws if desired Guides are keyed for top and bottom mounting, ambidextrously Transition guides are available for rear I/O and non-compliant designs using Compact PCI® form factors and hardware
Ordering Instructions: Part Number: CPCI-2000 XX Replace the "XX" with one of the following suffix to complete part number: RD Red color NT Natural / White color RD-ESD Red color with ESD grounding clip NT-ESD Natural / White color with ESD grounding clip