|
Tä
RIVET Fastening
System
Benefits
Technical Information
Order Samples
Benefits
- High Shear and Tensile
Strength: The hardened mandrel in the Tä Rivet
provides high tensile strength and shear values.
- High Clamp-up: The Tä
Rivet will draw sheets firmly together, even when
separated by as much as 3/16".
- Visible Lock: The Tä
Rivet will withstand severe vibration without loss of the
mandrel's plug section.
Technical
Information
LARGE FLANGE
PROTRUDING HEAD
Nom. Rivet Diam.
|
Hole Size and
Drill Number
|
S Mand. Diam.
|
D Rivet Diam.
|
Protruding
|
Large Flange
|
A Head Diam.
|
B Head Thick.
|
A Head Diam.
|
B Head Thick.
|
| 3/16" (4,8mm) |
.192-.196 (#11) (4,88-4,98) |
.116 (2,95) |
.187 (4,75) |
.395 (10,03) |
.091 (2,31) |
.562 (14,27) |
.091 (2,31) |
| 1/4" (6,4mm) |
.257-.261 (F) (6,53-6,63) |
.151 (3,84) |
.250 (6,35) |
.520 (13,21) |
.110 (2,79) |
.750 (19,05) |
.110 (2,79) |
*L
- Length varies with each grip length (see
following pages).
Typical Rivet Shear and Tensile
Strength (lb. f (N)) and
Mandrel Push-Out When Installed in
Nominal Grip
Tä Rivets
|
Rivet Diam.
|
Series B
Auminum Rivet
Auminum Mandrel
|
Series BS
Aluminum Rivet
Steel Mandrel
|
Shear
|
Tensile
|
Mandrel push-out
|
Shear
|
Tensile
|
Mandrel push-out
|
| 3/16" (4,8mm) |
800 (3558) |
550 (2446) |
25 (111) |
1000 (4448) |
600 (2669) |
25 (111) |
| 1/4" (6,4mm) |
1400 (6337) |
1000 (4448) |
25 (111) |
1900 (8451) |
1100 (4893) |
25 (111) |
NOTE:
The mandrels in all Tä Rivets are mechanically locked in place
during installation. THE SPECIALLY DESIGNED Tä RIVET NOSEPIECE
MUST BE USED WHEN INSTALLING T RIVETS. USE OF INCORRECT NOSEPIECE
WILL IMPAIR RIVET FUNCTION.
Rivet Diam.
|
G
Rivet Grip Range
|
L
Rivet Length Max.
|
Series BA
Aluminum Rivet Aluminum Stem
|
Series BS
Aluminum Rivet Steel Stem, Plated
|
Inch
|
mm.
|
Inch
|
mm.
|
Protruding Head
|
Large Flange
|
Protruding Head
|
Large Flange
|
| 3/16" (6) (4,8mm) |
.046-.078 |
1,17-1,98 |
.395 |
10,03 |
BAPTS-06-062 |
BALTS-06-062 |
BSPT-06-062 |
BSLT-06-062 |
| .078-.109 |
1,98-2,77 |
.395 |
10,03 |
BAPTS-06-093 |
BALTS-06-093 |
BSPT-06-093 |
BSLT-06-093 |
| .109-.140 |
2,77-3,56 |
.395 |
10,03 |
BAPTS-06-125 |
BALTS-06-125 |
BSPT-06-125 |
BSLT-06-125 |
| .140-.171 |
3,56-4,34 |
.395 |
10,03 |
BAPTS-06-156 |
BALTS-06-156 |
BSPT-06-156 |
BSLT-06-156 |
| .171-.203 |
4,34-5,16 |
.457 |
11,61 |
BAPTS-06-187 |
BALTS-06-187 |
BSPT-06-187 |
BSLT-06-187 |
| .203-.234 |
5,16-5,94 |
.457 |
11,61 |
BAPTS-06-218 |
BALTS-06-218 |
BSPT-06-218 |
BSLT-06-218 |
| .234-.265 |
5,94-6,73 |
.529 |
13,44 |
BAPTS-06-250 |
BALTS-06-250 |
BSPT-06-250 |
BSLT-06-250 |
| .265-.296 |
6,73-7,52 |
.529 |
13,44 |
BAPTS-06-281 |
BALTS-06-281 |
BSPT-06-281 |
BSLT-06-281 |
| .296-.328 |
7,52-8,33 |
.582 |
14,78 |
BAPTS-06-312 |
BALTS-06-312 |
BSPT-06-312 |
BSLT-06-312 |
| .328-.359 |
8,33-9,12 |
.582 |
14,78 |
BAPTS-06-343 |
BALTS-06-343 |
BSPT-06-343 |
BSLT-06-343 |
| .359-.390 |
9,12-9,91 |
.645 |
16,38 |
BAPTS-06-375 |
BALTS-06-375 |
BSPT-06-375 |
BSLT-06-375 |
| .390-.421 |
9,91-10,69 |
.645 |
16,38 |
BAPTS-06-406 |
BALTS-06-406 |
BSPT-06-406 |
BSLT-06-406 |
| .421-.453 |
10,69-11,51 |
.707 |
17,96 |
BAPTS-06-437 |
BALTS-06-437 |
BSPT-06-437 |
BSLT-06-437 |
| .453-.484 |
11,51-12,29 |
.707 |
17,96 |
BAPTS-06-468 |
BALTS-06-468 |
BSPT-06-468 |
BSLT-06-468 |
| .484-.515 |
12,29-13,08 |
.770 |
19,56 |
BAPTS-06-500 |
BALTS-06-500 |
BSPT-06-500 |
BSLT-06-500 |
| 1/4" (8) (6,4mm) |
.093-.156 |
2,36-3,96 |
.500 |
12,70 |
BAPTS-08-125 |
BALTS-08-125 |
BSPT-08-125 |
BSLT-08-125 |
| .156-.218 |
3,96-5,54 |
.562 |
14,27 |
BAPTS-08-187 |
BALTS-08-187 |
BSPT-08-187 |
BSLT-08-187 |
| .218-.281 |
5,54-7,14 |
.625 |
15,88 |
BAPTS-08-250 |
BALTS-08-250 |
BSPT-08-250 |
BSLT-08-250 |
| .281-.343 |
7,14-8,71 |
.687 |
17,45 |
BAPTS-08-312 |
BALTS-08-312 |
BSPT-08-312 |
BSLT-08-312 |
| .343-.406 |
8,71-10,31 |
.750 |
19,05 |
BAPTS-08-375 |
BALTS-08-375 |
BSPT-08-375 |
BSLT-08-375 |
| .406-.468 |
10,31-11,89 |
.812 |
20,62 |
BAPTS-08-437 |
BALTS-08-437 |
BSPT-08-437 |
BSLT-08-437 |
| .468-.531 |
11,89-13,49 |
.875 |
22,23 |
BAPTS-08-500 |
BALTS-08-500 |
BSPT-08-500 |
BSLT-08-500 |
| .531-.593 |
13,49-15,06 |
.937 |
23,80 |
BAPTS-08-562 |
BALTS-08-562 |
BSPT-08-562 |
BSLT-08-562 |
NOTES:
T Rivet stems
break near flush with rivet head in maximum grip.
Finishes,
aluminum rivets, and stems are coated with a wax
lubricant. Steel stems are zinc plated.
Items listed
do not reflect our full manufacturing capability. Please
call for information on other sizes.
Multi-Grip T
RIVET Fastening System
In addition to the
regular T Rivets shown on the preceding pages, Avdel Cherry
produces the same basic configuration with a mandrel that will
break near flush with the rivet head at three different points
instead of just one. This unique design permits, in certain
applications, a much wider grip range per rivet. This greatly
reduces rivet handling and inventories since one
"multi-grip" rivet will cover the range of several
"single-grip" rivets.
Rivet Diam.
|
G Grip Range
|
L Rivet Length
|
Series BS
Aluminum Rivet Steel Mandrel, Plated
|
Min.
|
Max.
|
Max.
|
Protruding Head
|
Large Flange Head
|
Countersunk Head
|
| 3/16" (4,8mm) |
.046 (1,17) |
.203 (5,16) |
.457 (11,61) |
BSPT-06-03 |
BSLT-06-03 |
|
| .203 (5,16) |
.390 (9,91) |
.645 (16,38) |
BSPT-06-06 |
BSLT-06-06 |
BSCT-06-06 |
| .390 (9,91) |
.578 (14,68) |
.832 (21,13) |
BSPT-06-09 |
BSLT-06-09 |
BSCT-06-09 |
| .578 (14,68) |
.765 (9,43) |
1.02 (25,91) |
BSPT-06-12 |
BSLT-06-12 |
BSCT-06-12 |
|
