| |
 |
Direct Rambus™ Technology |
Rambus Corporation develops and markets high speed interface
technology used in logic ICs and DRAM memory chips. Rambus has developed
Direct Rambus™ Technology; the next generation Rambus memory
technology standard for PC's, consumer, and communications industries for
1999 and beyond. RIMM™ (Rambus Inline Memory Modules) represent
the next-generation of Rambus Memory Module Technology. Avdel Cherry
Textron has developed a Briv® speed fastening solution for assembly of
the RIMM memory module in both the single and dual heat spreader
configuration.
Briv Speed Fastening Solution
Overview for Briv Solution
Installation Tools
Removal Solution
| Briv Speed Fastening Solution |
|
|
To enlarge, place the pointer on the picture*. |
- Briv Speed Fastener
|
|
|
To enlarge, place the pointer on the picture*. |
- Cartridge with Briv fasteners ready for loading onto mandrel (left).
Mandrel with pre-loaded Briv fasteners (right). |
|
|
 |
- Setting Sequence of Briv - Shoulderless Briv |
|
|
To enlarge, place the pointer on the picture*. |
- Single Heat Spreaders Attach to RIMM |
Overview for Briv Solution
- Low Installed Cost -- Up to thirty fasteners per minute
(sixty with automated tools) can be set without any specialized labor.
- Reduced Labor -- The speed of placement can free operators to
conduct tasks other than mechanical fastening.
- Versatility -- Speed fasteners are available in many types,
sizes, and materials to meet the requirements of the most demanding
applications - from automotive to electronic. Additionally, the Speed
Fastening system permits "fine tuning," as the mandrel
configuration can be altered to meet differing hole tolerances.
- Reliability -- Speed fasteners can permanently join
applications and can withstand severe vibration and environmental
conditions.
- Test Results for 1810-6314 (3 sheet) / 1810-6324 (2 sheet)
| Avdel Cherry Part No. |
Shank Expansion |
Tail Protrusion (Installed) |
Broach Load (Air) |
Broach Load (Application) |
Push Out Load |
Shear (Min) |
| 1810-6314 |
.0997" Av. |
.020" Av. |
150lbs |
150lbs |
50lbs Min |
50lbs |
| 1810-6324 |
.0994" Av. |
.027" Av. |
145lbs |
150lbs |
50lbs Min |
50lbs |
* Tests completed in 'Rambus' application - hole
diameter as per drawing - 2.36mm
| Modular Assembly Systems -
Installation Tools |
Single Head System Solution
|
Click to view the
Single Head System Solution
in action (mpeg video file, 5.92 meg) |
To enlarge, place the
pointer on the picture*. |
Four Head System Solution
|
|
To enlarge, place the
pointer on the picture*. |
Click
to view the Four Head System Solution in action
(mpeg video file, 7.6 meg) |
|
|
|
|
|
|
|
| Briv Removal Solution |
| Arbor press removing Briv |
 |
| RIMM after Briv has been removed |
 |
Click to view the Removal in Action
(mpeg video file, 4.481 meg)
|
|
Advantages of Briv Removal
- Removal without drilling or damaging module.
- Quick, easy and inexpensive Briv removal.
|
For additional information about the Briv fastening solution, call (800) 453-1692
, fax 408-573-4343, or click
here to contact us.
*Enlargment of the
picture is compatible with Internet Explorer 4 and higher.
Briv, Rivscrew, Chobert, Avtronic, Grovit, and Avlug
are registered trademarks of Avdel Cherry Textron Inc.
Rambus, Direct
Rambus, RIMM and the Rambus logo are registered trademarks of Rambus Inc.
Intel
& Pentium II, the Intel logo, the Intel Inside logo, and the Pentium
Processor logo are registered trademarks of Intel.
|
