BRIV® Fastening Systems

Benefits
Technical Information
Order Samples

Application using BRIV® Fastening: Rambus Corporation

BENEFITS

  • Low Cost: Substantial savings in installed costs can berealized when Briv® fasteners are substituted for spot welds, loosehardware, or traditional nail rivets.
  • Fast Installation: Magazine-fed fasteners can be placed asfast as an operator can move from hole to hole, and can be installed bysemiautomatic or fully automated systems.
  • Versatile: A wide range of mandrel sizes enables Briv®expansion to accommodate hole size variations.


TECHNICAL INFORMATION

  Series 1801, 1821,
1831/3, 1841
Mushroom Head
Series 1822
Countersunk Head
Nom.
Rivet
Diam.
Hole Size Std.
Mand.
Diam.*
A
Rivet
Diam.
B
Head
Diam.
D
Max.
Head
Thick.
B
Head
Diam.
D
Max.
Head
Thick
3/32 .0930 - .0960 .073 .0875 - .0923 .148 - .162 .030 - .035 - -
1/8 .1285 - .1315 .092 .1199 - .1245 .233 - .257 .032 - .039 .200 - .235 .035
5/32 .1562 - .1592 .110 .1495 - .1535 .298 - .322 .032 - .039 - -
3/16 .1910 - .1940 .140 .1839 - .1885 .358 - .382 .039 - .046 - -
* Multiple mandrel diameters available - see Briv® mandrel selection

Typical Rivet Shear and Tensile Strength (lbs.)
BRIV®
Rivet
Diam.
Series 1801
Aluminum
Series 1821
Steel
Series 1831
Brass
Series 1841**
Stainless Steel
Series 1822
Steel
Shear Tens. Shear Tens. Shear Tens. Shear Tens. Shear Tens.
3/32 - - - - 140 200 - - - -
1/8 170 295 255 410 250 430 - - 213 370
5/32 255 390 370 630 420 620 550 800 - -
3/16 340 615 505 835 520 810 800 1150 - -
* * 1841 requires special mandrel.See Briv® mandrel selection

Series Material Finish
1801 Aluminum Plain
1821 Steel Zinc Plated
1831 Brass Bright
1841 Stainless Steel Plain
1822 Steel Zinc Plated

G - Grip is totalof material thickness

Rivet
Diam.
G
Rivet
Grip
Range
L
Length
Max.
Series
1801
Alum.
Series
1821
Steel
Series
1831
Brass
Series
1841
St. Steel
Series
1822
Steel
3/32" .045 - .095 .157 - - 1831-0304 - -
.085 - .135 .197 - - 1831-0306 - -
.125 - .175 .237 - - 1831-0308 - -
.165 - .215 .277 - - 1831-0310 - -
.205 - .255 .317 - - 1831-0312 - -
.245 - .295 .357 - - 1831-0314 - -
1/8 .045 - .095 .172 1801-0404 1821-0404 1831-0404 - -
.085 - .135 .212 1801-0406 1821-0406 1831-0406 - -
.125 - .175 .252 1801-0408 1821-0408 1831-0408 - -
.165 - .215 .292 1801-0410 1821-0410 1831-0410 - -
.205 - .255 .332 1801-0412 1821-0412 1831-0412 - -
5/32 .062 -.115 .193 1801-0505 1821-0505 1831-0505 1841-0505 -
.105 - .155 .233 1801-0507 1821-0507 1831-0507 1841-0507 -
.145 - .195 .273 1801-0509 1821-0509 1831-0509 1841-0509 -
.185 - .235 .313 1801-0511 1821-0511 1831-0511 1841-0511 -
.255 - .275 .353 1801-0513 1821-0513 1831-0513 1841-0513 -
3/16 .080 - .155 .240 1801-0607 1821-0607 1831-0607 1841-0607 -
.145 -.205 .290 1801-0609 1821-0609 1831-0609 1841-0609 -
.195 - .255 .340 1801-0611 1821-0611 1831-0611 1841-0611 -
.245 - .305 .390 1801-0613 1821-0613 1831-0613 1841-0613 -
.295 - .355 .440 1801-0615 1821-0615 1831-0615 1841-0615 -
CSK
HD.
1/8
.060 - .110 .188 - - - - 1822-0406
.100 - .150 .228 - - - - 1822-0407
.140 - .190 .268 - - - - 1822-0408
.180 - .230 .308 - - - - 1822-0410
.220 - .270 .348 - - - - 1822-0411

Notes:
1. To install Avdel Cherry fasteners, use of Avdel Cherry specified installation tooling is recommended.
2. Avdel Cherry fasteners are ready for use as supplied and should not be reprocessed or degreased prior to installation, as this may affect performance.
3. Unpodded rivets for use with Rivmatic are coded 1822-9XXX (5th digit=9).  They are identical to the 1822-0XXX rivets, but screened for use in automated equipment.
4. Items listed on these pages represent currently manufactured parts.  Please contact your Above Board Electronics representative regarding lengths or dimensions not listed.

Nose Equipment*
BRIV®
(Aluminum Alloy, Brass, Steel)
Nom. Dia. Jaw Type Part No. Inch Dimensions
B D E
3/32 Std Flat Tapered 7170-3103 .41 1.11 .200
3/32 Std Ltd Access Cam Operated 7177-3003 .20 1.18 .180
3/32 Std Ltd Access Reduced Diam. 7274-1000 .22 1.07 .156
1/8 Std Flat 7150-3004 .41 1.18 .200
1/8 Std Flat Cam Operated 7170-4600 .41 1.18 .200
1/8 Std Tapered 7170-3104 .41 1.11 .200
1/8 Recessed High Clench 7170-3004 .41 1.20 .300
1/8 Std Universal 7150-3204 .41 1.22 .320
1/8 Long Flat 7150-4004 .41 2.18 .200
1/8 Recessed Long High Clench 7170-3204 .41 2.18 .300
1/8 Long Flat Cam Operated 7170-5000 .41 2.22 .200
1/8 Universal Long Straight 7170-4204 .41 2.22 .300
1/8 Recessed High Clench Lng Crvd 7170-3304 .41 2.12 .300
5/32 Std Flat 7150-3005 .48 1.30 .24
5/32 Std Flat Cam Operated 7170-4700 .48 1.30 .24
5/32 Recessed High Clench 7170-3005 .48 1.32 .41
5/32 Long Flat 7150-4005 .48 2.30 .24
5/32 Recessed Long High Clench 7170-3205 .48 2.30 .41
5/32 Long Flat Cam Operated 7170-5100 .48 2.3 .24
5/32 Universal Long Straight 7150-4205 .48 2.35 .42
5/32 Long Curved Flat 7150-5005 .48 2.23 .24
5/32 Recessed Long Crvd High Clench 7170-3305 .48 2.23 .41
3/16 Std Flat 7150-3006 .56 1.18 .33
3/16 Std Flat Cam Operated 7170-4800 .56 1.18 .33
3/16 Recessed High Clench 7170-3006 .56 1.20 .47
3/16 Std Universal 7150-3206 .56 1.24 .47
3/16 Long Flat 7150-4006 .56 2.30 .33
3/16 Recessed Long High Clench 7170-3206 .56 2.30 .47
3/16 Long Flat Cam Operated 7150-5200 .56 2.30 .33
3/16 Long Universal 7150-4206 .56 2.39 .48
3/16 Long Curved Flat 7150-5006 .56 2.21 .33
3/16 Recessed Long Crvd High Clench 7170-3306 .56 2.21 .47


Mandrel Specifications
BRIV®
Rivet
Diam.
Hole
Size
Mandrel
Head
Description Spring
P/N
Long or
Curved
Spring
P/N
Regular
Mandrel
P/N
Long or
Curved
Mandrel
P/N
3/32 .093 .073 Standard 7170-6873 7170-7873 7150-6013 7150-7013
.096 .076 #1 O.S. 7170-6873 7170-7873 7150-6113 7150-7113
.099 .079 #2 O.S. 7170-6873 7170-7873 7150-6213 7150-7213
1/8 .128 .092 Standard 7150-6814 7150-7814 7150-6014 7150-7104
.133 .097 #1 O.S. 7150-6814 7150-7814 7150-6114 7150-7114
.138 .102 #2 O.S. 7150-6814 7150-7814 7150-6214 7150-7214
5/32 .156 .110 Standard 7170-6875 7170-7875 7150-6015 7150-7015
.161 .115 #1 O.S. 7170-6875 7170-78756 7150-6115 7150-7115
.166 .120 #2 O.S. 7170-6875 7170-7875 7150-6215 7150-7215
3/16 .191 .140 Standard 7170-6876 7170-7876 7150-6016 7150-7016
.196 .145 #1 O.S. 7170-6876 7170-7876 7150-6116 7150-7116
.201 .150 #2 O.S. 7170-6876 7170-7876 7150-6216 7150-7216
.204 .153 #3 O.S. 7170-6876 7170-7876 7150-6316 7150-7216
5/32 .156/.159 .120 Standard 7170-6875 7170-7875 7170-6805 7170-7805
.161/.164 .125 #1 O.S. 7170-6875 7170-7875 7170-6825 7170-7825
3/16 .191/.194 .153 Standard 7170-6876 7170-7876 7170-682 7170-7806
.196/.199 .158 #1 O.S. 7170-6876 7170-7876 7170-6826 7170-7826
* Briv® Stainless mandrels have a slot cut across theexpanded tip. Do not use any mandrel with Briv® Stainless that does nothave the slot.



| Briv® | Rivscrew® | Chobert® | Avtronic |
| Avsert® | Rivscrew® SP | Grovit® | Avlug® | Placement Tools |

| Speed Fastening | Breakstem Fasteners | Blind Threaded Inserts | Structural Fastening | Avdel Cherry Textron Catalog Index


Other ABE Approved ManufacturersUnitrack Design GuideThomas and Betts Design GuideSouthco Design GuideSanyo Denki Design GuideRecoil Hardware Design GuideRAF Electronic Hardware Design GuidePOP Design GuidePIC Designs Design GuidePanduit Design GuideMicro Plastics Design GuideManhattan/CDT Design GuideKeystone Electronics Design Guideigus Design GuideHeyco Products Design Guide Craftech Design GuideCaptive Fasteners Design GuideAvdel Cherry Textron Design GuideAccuride Design GuideABE Commercial ProductsSearch ABE's web site Manufacturer's Log InCustomer's Log In