 |
GH-752
The GH-752 is a hand hydraulic
tool that provides high pulling
forces without increasing
operator effort. This is
achieved by the use of a
patented two-stage power
feature capable of placing the
full range of threaded inserts
from 4-40 to 5/16 Imperial, M3
to M12 metric dimensions 2.4"
X 7.75".
|
| |
Top |
|
| |
|
|
 |
MODEL
742 Lightweight
and ergonomically designed, the Model 742 tool is a
pneumatic-hydraulic "spin-pull" type tool.
Blind threaded inserts are installed with a simple
"spin-on, pull-up, spin-off" sequence utilizing
a fast and simple one-step trigger. The extensive working
range includes M3 to M10 Metric and 4-40 to 5/16
Imperial, including some M12 and 3/8 variants.
|
| Weight |
4.85 lbs (2.2 kg) |
| Stroke |
.276" (7mm) |
| Pull Force |
4,380 lbf @75 psi (19.5
kN @ 5 bar) |
| |
Top |
|
| |
|
|
 |
MODEL
744 The
remote-head Model 744 tool is designed for placement of
large-diameter blind threaded inserts. The separate
hydraulic system generates power to pull large diameter
inserts while using a small lightweight placing head. The
744 uses a fast and simple one-step trigger to
"spin-on, pull-up, spin-off" all blind threaded
inserts from M3 to M12 Metric and 4-40 to 3/8 Imperial.
Available options include special-purpose "in-line
head" and foot-pedal actuation.
|
 |
Weight (head) Stroke
Pull Force
|
4.5 lbs (2
kg) 552" (14mm)
8,220 lbf @75 psi (36.6 kN
@ 5 bar)
|
| |
Top |
|
| |
|
|
 |
MODEL
7556 and MODEL 7557 The 7556 and 7557 are high-production,
rugged, lightweight "spin-spin" tools utilizing
an internal torque-sensing clutch for consistent blind
threaded insert placement. These tools permit complete
portability on any assembly line, and have been used in
industry for many years because of their durable and
reliability.
|
| Model 7556 Range |
Most
styles of inserts from 4-40 to #10 Imperial, M3 to M8
Metric. |
| Weight |
3.9 lbs
(1.76 kg) |
| Motor
Speed |
1,000 RPM
@ 75 psi (5 bar) |
| Cycle
Time |
Approximately
3 seconds |
| Model
7557 Range |
Most
styles of inserts from 6-32 to 1/4 Imperial, M5 to M10
Metric. |
| Weight |
3.64 lbs
(1.65 kg) |
| Motor
Speed |
550 RPM @
75 psi (5 bar) |
| Cycle
Time |
Approximately
3 seconds |
| |
Top |
|
| |
|
|
 |
MODEL
7572 Model 7572
incorporates all the features of the 7556/7557 series
tools in a smaller, lighter "in-line" style.
|
| Model
7572 Range |
Most
styles of inserts from 4-40 to #10 Imperial, M3 to M6
Metric. |
| Weight |
2.5 lbs
(1.15 kg) |
| Motor
Speed |
900 RPM @
75 psi (5 bar) |
| Cycle
Time |
Approximately
3 seconds |
| |
Top |
|
| |
|
|
 |
MODEL
9600 Model 9600
is a manually-operated "squeeze" tool to
install blind threaded inserts. It is designed for use
where a compressed air source is unavailable.
Available nose assembly
conversion kits allow installation of blind threaded
inserts from 4-40 to 3/8 Imperial, M3 to M10 Metric. Tool
kits are available for prototyping, re-work and
maintenance applications.
Dimensions are
approximately 10-1/2" x 7-1/4" in the
"open" position.
|
| |
Top |
|
| |
|
|
 |
AUTOSERT High-volume production capability
and cutting-edge assembly technology come together for
blind threaded insert applications with the Avdel Cherry
Autosert and Autosert 360 automated assembly systems.
The Autosert is a
"stand-alone" table top unit designed for
high-volume batch or flow-line assembly. The Autosert 360
is a fully "robotic-integratable" unit designed
for blind threaded insert installation requiring multiple
orientations to the workpiece.
Avdel Cherry offers design
support technicians to help determine the optimum
equipment for your application.
|
| |
Top |
|
| |
|
|
 |
HYDRA
3000 Modular-based
multi-head workstations designed to install M3 to M6
Nutserts.
|
| |
Top |
|
