NUTSERTŽ

NUTSERT^Ž Fastening System

Benefits
Technical Information
Order Samples

BENEFITS

Reduced Assembly Costs:
Installed from one side of the workpiece.
Not Grip Sensitive:
Can be used in any material thickness from .030" through solid materials..
Permanent:
Radial expansion of Nutsert^Ž provides 360° contact with parent material.
Portability:
Allows installation anywhere and at any time in the assembly process.
Rear Protrusion:
Reduced rear-sheet protrusion.

TECHNICAL INFORMATION

Splined Body
Series 9506
Series 9507
Series 9504
Series 9505
Series 9508

Plain Body
Series 9504P
Series 9505P
Series 9508P

Series 9506 - Splined Body
Material	Alloy	Finish
Carbon Steel	C1108/C110	Cadmium Plate

Thread
Size

Part
Number

*Recommended Minimum Hole Size 'C'

Material
Thickness
'G' Min.

.030-.090
(0.76-2.29)

.091-.124
(2.31-3.15)

.125-.186
(3.18-4.72)

.187-OVER
(4.75-OVER)

1/4-20
UNF

9506-08

.3699-.3749
(9.40-9.52)

.252-.262
(6.40-6.65)

.525
(13.34)

.375
(9.53)

.386
(9.80)

.3906
(9.92)

5/16-24
UNF

9506-10

.4949-.4999
(12.57-12.70)

.302-.312
(7.67-7.92)

.625
(15.88)

.500
(12.70)

.5156
(13.10)

3/8-24

9506-12

.5572-.5622
(14.15-14.28)

.365-.375
(9.27-9.53)

.750
(19.05)

.5625
(14.29)

.5781
(14.68)

*DEPENDENT UPON MATERIAL THICKNESS AND APPLICATION

Notes:
1.	All dimensions shown in () are millimeters, otherwise imperial.
2.	Fasteneres may not perform properly if altered from the manufacturer's as-shipped condition or installed in conditions other than specified herein.

Top

Series 9507 - Splined Body
Material	Alloy	Finish
Carbon Steel	C1108/C110	Cadmium Plate

Thread
Size

Part
Number

*Recommended Minimum Hole Size 'C'

Material
Thickness
'G' Min.

.030-.090
(0.76-2.29)

.091-.124
(2.31-3.15)

.125-.186
(3.18-4.72)

.187-OVER
(4.75-OVER)

10-32
UNF

9507-10

.2760-.2810
(7.01-7.14)

.180-.190
(4.57-4.83)

.385
(9.78)

.2812
(7.14)

.2900
(7.37)

.2968
(7.54)

*DEPENDENT UPON MATERIAL THICKNESS AND APPLICATION

Notes:
1.	All dimensions shown in () are millimeters, otherwise imperial.
2.	Fasteneres may not perform properly if altered from the manufacturer's as-shipped condition or installed in conditions other than specified herein.

Top

Series 9504 - Splined Body
Material	Alloy	Finish
Carbon Steel	C1108/C110	Cadmium Plate

Thread
Size

Part
Number

*Recommended Minimum Hole Size 'C'

Material
Thickness
'G' Min.

.030-.090
(0.76-2.29)

.091-.124
(2.31-3.15)

.125-.186
(3.18-4.72)

.187-OVER
(4.75-OVER)

1/4-20
UNC

9504-08

.3699-.3749
(9.40-9.52)

.252-.262
(6.40-6.65)

.525
(13.34)

.375
(9.53)

.386
(9.80)

.3906
(9.92)

5/16-18
UNC

9504-10

.4949-.4999
(12.57-12.70)

.302-.312
(7.67-7.92)

.625
(15.88)

.500
(12.70)

.5156
(13.10)

3/8-16
UNC

9504-12

.5572-.5622
(14.15-14.28)

.365-.375
(9.27-9.53)

.750
(19.05)

.5625
(14.29)

.5781
(14.68)

*DEPENDENT UPON MATERIAL THICKNESS AND APPLICATION

Notes:
1.	All dimensions shown in () are millimeters, otherwise imperial.
2.	Fasteneres may not perform properly if altered from the manufacturer's as-shipped condition or installed in conditions other than specified herein.

Top

Series 9505 - Splined Body
Material	Alloy	Finish
Carbon Steel	C1108/C110	Cadmium Plate

Thread
Size

Part
Number

*Recommended Minimum Hole Size 'C'

Material
Thickness
'G' Min.

.030-.090
(0.76-2.29)

.091-.124
(2.31-3.15)

.125-.186
(3.18-4.72)

.187-OVER
(4.75-OVER)

4-40
UNC

9505-04

.1820-.1870
(4.63-4.75)

.180-.190
(4.57-4.83)

.385
(9.78)

.1875
(4.76)

.1935
(4.91)

6-32
UNC

9505-06

.2136-.2186
(5.42-5.55)

.180-.190
(4.57-4.83)

.385
(9.78)

.2187
(5.55)

.2210
(5.61)

.2280
(5.79)

8-32
UNC

9505-08

.2449-.2499
(6.20-6.35)

.180-.190
(4.57-4.83)

.385
(9.78)

.2500
(6.35)

.2570
(6.53)

.2656
(6.75)

10-24
UNC

9505-10

.2760-.2810
(7.01-7.14)

.180-.190
(4.57-4.83)

.385
(9.78)

.2812
(7.14)

.2900
(7.37)

.2968
(7.54)

*DEPENDENT UPON MATERIAL THICKNESS AND APPLICATION

Notes:
1.	All dimensions shown in () are millimeters, otherwise imperial.
2.	Fasteneres may not perform properly if altered from the manufacturer's as-shipped condition or installed in conditions other than specified herein.

Top

Series 9508 - Splined Body
Material	Alloy	Finish
Carbon Steel	C1108/C110	Cadmium Plate

Thread
Size

Part
Number

*Recommended Minimum Hole Size 'C'

Material
Thickness
'G' Min.

.030-.090
(0.76-2.29)

.091-.124
(2.31-3.15)

.125-.186
(3.18-4.72)

.187-OVER
(4.75-OVER)

M3 X 0.5

9508-03

.1820-.1870
(4.63-4.75)

.180-.190
(4.57-4.83)

.385
(9.78)

.1875
(4.76)

.1935
(4.91)

M4 X 0.7

9508-04

.2449-.2499
(6.20-6.35)

.180-.190
(4.57-4.83)

.385
(9.78)

.2500
(6.35)

.2570
(6.53)

.2656
(6.75)

M5 X 0.8

9508-05

.2760-.2810
(7.01-7.14)

.180-.190
(4.57-4.83)

.385
(9.78)

.2812
(7.14)

.2900
(7.37)

.2968
(7.54)

M6 X 1.0

9508-06

.3699-.3749
(9.40-9.52)

.252-.262
(6.40-6.65)

.525
(13.34)

.375
(9.53)

.386
(9.80)

.3906
(9.92)

M8 X 1.25

9508-08

.4949-.4999
(12.57-12.70)

.302-.312
(7.67-7.92)

.625
(15.88)

.500
(12.70)

.5156
(13.10)

M10 X 1.5

9508-10

.5572-.5622
(14.15-14.28)

.365-.375
(9.27-9.53)

.750
(19.05)

.5625
(14.29)

.5781
(14.68)

*DEPENDENT UPON MATERIAL THICKNESS AND APPLICATION

Notes:
1.	All dimensions shown in () are millimeters, otherwise imperial.
2.	Fasteneres may not perform properly if altered from the manufacturer's as-shipped condition or installed in conditions other than specified herein.

Top