Rivscrew 1700 - Zinc Plated Avdel Rivscrew

RIVSCREW	Zinc Plated Avdel Rivscrew
	Series 1700

Click here to order samples of any item on this page

Series	Material	Finish
1711 1712 1713 1714	Low Carbon Steel SAE 1012/DTD 720B	Electroless Nickel Zinc Plated and Gold Passivated Hot Tin Dipped Zinc Plated & Black Passivated

View Speed Fastening Demo

Installed
Thd. Size Podded
Part No. Inch Dimensions mm Dimensions

'M' 'L' max 'V' max 'M' 'L' max 'V' max

3.0 mm 1712-3006
1712-3007
1712-3009
1712-3010
*1712-3011
1712-3012 .187-.202
.226-.241
.265-.280
.304-.319
.344-.359
.382-.397 .157
.196
.235
.274
.314
.352 .112
.151
.190
.229
.268
.307 4.75-5.14
5.75-6.13
6.74-7.12
7.73-8.11
8.74-9.12
9.71-10.10 3.99
4.98
5.97
6.96
7.98
8.94 2.85
3.85
4.83
5.82
6.81
7.80

3.5 mm 1712-3506
1712-3507
1712-3509
1712-3510
*1712-3511
1712-3512 .187-.202
.226-.241
.265-.280
.304-.319
.344-.359
.382-.397 .157
.196
.235
.274
.314
.352 .112
.151
.190
.229
.268
.307 4.75-5.14
5.75-6.13
6.74-7.12
7.73-8.11
8.74-9.12
9.71-10.10 3.99
4.98
5.97
6.96
7.98
8.94 2.85
3.85
4.83
5.82
6.81
7.80

4.0 mm 1712-4006
1712-4007
1712-4009
1712-4010
1712-4011
*1712-4012 .187-.202
.226-.241
.265-.280
.304-.319
.344-.359
.382-.397 .157
.196
.235
.274
.314
.352 .112
.151
.190
.229
.268
.307 4.75-5.14
5.75-6.13
6.74-7.12
7.73-8.11
8.74-9.12
9.71-10.10 3.99
4.98
5.97
6.96
7.98
8.94 2.85
3.85
4.83
5.82
6.81
7.80

Inch Dimensions

Installed
Thd. Size 'B' Dia. 'C' Dia. 'D' max. 'F' A?F Key Size 'W' min. Front Sht.
Hole Dia. Rear Sht.
Hole Dia.

3.0 mm .240 .215-.230 .055 1/16 (.0615/.0625) .064 .121-.124 .111-.114

3.5 mm .240 .220-.235 .055 5/64 (.0771/.0781) .064 .138-.141 .122-.125

4.0 mm .250 .230-.245 .055 3/32 (.0927/.0937) .064 .157-.160 .137-.140

mm Dimensions

3.0 mm 6.10 5.46-5.85 1.40 1/16 (.0615/.0625) 1.62 3.07-3.15 2.82-2.89

3.5 mm 6.10 5.58-5.97 1.40 5/64 (.0771/.0781) 1.62 3.50-3.58 3.10-3.17

4.0 mm 6.35 5.84-6.23 1.40 3/32 (.0927/.0937) 1.62 3.99-4.06 3.48-3.56

Installation Procedure

Notes:
1.	Unpodded and screened Rivscrew for use with Rivmatic (1712-3306, etc.) are identical to podded Rivscrews (1712-3006, ect.). Note: 3 added to 6th digit of podded Part Nos. to make unpodded & screened Part Nos.
2.	To install Avdel fasteners, use of Avdel specified installation tooling is recommended.
3.	Avdel fasteners are ready for use as supplied and shall not be reprocessed or degreased prior to installation as this may affect performance.
4.	Part Nos.marked * are for advance information only.

Rivscrew is a registered trademark of Avdel Group Companies Data Sheet No. 1700-1094